PRIVATE AND CONFIDENTIAL
NC/100 MEASUREMENT CHART
Customer ______________________ Date ___________
Important it is essential that the collar should not be a tight fit on the neck, it can give rise to a dangerous situation.
These ranges of collars are of a welded / riveted construction and are not adjustable. Whilst small errors are not difficult to correct, major ones will invariably incur higher cost. An ordinary fabric or plastic tape measure of the type used for dressmaking is best for taking the measurements.
Measure the circumference of the neck over the Adams apple with the tip of the forefinger inside the tape measure; this will ensure adequate clearance. No attempt should be made to achieve a snug fit, under certain conditions the neck can swell so allowance must be made.
The finished size will be to your measurement including the lining.

Neck collars

Inches

Cms

N/A

Neck Circumference

 

 

 

Collar Height *

 

 

 

(* See product list)

Plain

 

D-Ring

 

Chain

 

The NC/100 can be supplied Plain, with a D-Ring or a D-Ring with a short chain attached, please indicate choice by ticking appropriate box. There is no extra charge for a D-Ring or chain, but extra D-rings will be charged as per price list. If you require extra D-Rings, please indicate the locations bearing in mind that they cannot be located in the position occupied by the lock.
I certify that these measurements are correct. Signed _____________________________